FEATURED BASICS
Garden Pergola, Building a
Rain Barrel, Creating a
Cutting Board, Installing a Pull Out
Flooring, Benefits of Cork
Fence, Building a Three-Board
Light Fixtures, Energy Efficient
Wainscoting, Installing Faux
Crown Molding, Installing
Table, Staining a
Tree, Removing a
Wall Painting, Successful
Bathroom, Updating a Faucet
Vessel Sink, Updating a Bathroom With a
Radiant Flooring
Patio Face Lift
Gardening with Kids
Converting a Closet into a Dry Bar
Building a Trash Hideaway
Backyard Dining Room, Creating a
Fireplace, Updating Your
Building a "Morning" Closet
Kitchen Island, Customizing
Doghouse, Building a
Testing Household Water
Tile Backsplash, Recycled
Bike Lift, Ceiling Mounted
Raised Vegetable Garden, Planting
30 Minute Home Repair
Installing a retaining wall
  • Rain Barrel, Creating a
  • This DIY Basic, brought to you by The Home Depot, will provide tips on creating a rain barrel.
    advertisement

    Sponsored By
    Features
    The Kit
    Get More Info

    Click here to view a larger image.

    Figure A

    Click here to view a larger image.

    Figure B

    Click here to view a larger image.

    Figure C

    Click here to view a larger image.

    Figure D

    Click here to view a larger image.

    Figure E

     WINDOWS MEDIA VIDEO
    Watch the Video

    By positioning rain barrels under downspouts (figure A) you can collect enough run-off to significantly cut your outdoor watering bill.

    • A fifty-five gallon plastic drum with an intake hole cut in the top will work well.

    • Creating a drainage hole toward the top of the barrel will enable overflow water to escape.

    • A hole toward the bottom will allow you to drain captured water for use around your home.

    • The male parts of faucet assemblies fitted with rubber washers can be inserted from the inside of the barrel (figure B) and the faucet fixtures can be threaded on from the outside.

    • A screen filter will prevent gutter debris from entering your barrel (figure C).

    • By modifying your downspout you can attach an extender tube and feed it through a filter that sits in the top hole (figure D).

    • A screen filter will prevent gutter debris from entering your barrel and the water will flow best from the barrel if it is raised off the ground (figure E).

    • By creating several rain barrels you can save enough water to help you get through the hot and dry summer months.

    Web Extras

    • The size of the hole you cut in the top will be determined by the size of the filter basket you plan to use. Allow enough room for the basket’s lip to rest on top of the barrel so it won’t fall in. The diameter should be large enough to accommodate the downspout extender tube.

    • By drilling a starter hole, you can slip the blade of a jigsaw in more easily.

    • Placing a rubber washer on the inside piece will ensure a watertight seal.

    • Use a 1 1/8-inch spade bit to create the bottom and top drain holes.

    • To modify the downspout, separate sections of the downspout or cut it with a hacksaw. Attach a 90-degree downspout elbow and then the plastic extender pipe.

    • Use a plastic or nylon screen so it doesn’t rust.


    RESOURCES :

    The Home Depot Information

    Website: www.homedepot.com