HOME BUILDING Index
Custom Homes
Log Cabins
Vacation Homes
Other

Electrical Systems & Wiring
Garages, Basements & Attics
Heating & Cooling
Home Exterior
Home Interior
Inspections & Codes
Insulation and Energy Efficiency
Plumbing
Rooms
Sewerage & Septic Systems
Site Preparation
Other

BEST OF HOME BUILDING
Best Built Zone
Home IQ
Heck of a Deck
Weekend Projects
Home Renovations
Be Your Own Contractor

SPONSOR LINKS

  • Blog Cabin: Bathroom Tile and Radiant Heat Flooring Mats
  • The bathroom in DIY's Blog Cabin gets some stylish tile and something radiant to warm the feet on cold mornings.
    From "Blog Cabin"
    episode DBLG-109


    PHOTO

    The completed tile floor
    PHOTO

    The tiling motif was continued on the tub surround.
    In this installment of DIY's Blog Cabin the tile work is completed in the cabin’s bathrooms with the expertise of DIY host Amy Matthews. The natural floor tile, selected by DIY bloggers, is laid in both the upstairs and master bathrooms. The team continues tiling the tub surround in the upstairs bath, and finishes up the bathrooms with radiant floor heating.

    Materials:

    tiles
    mortar
    grout
    graph paper
    chalk (for chalk line)
    cement backing board (if tiling a wall)
    radiant heat mat

    advertisement


    Tools:

    wet saw (optional)
    tile nippers
    tile cutter
    notch trowel
    grout float
    carpenter's levels
    rubber mallet
    4 ft. straight edge
    chalk line
    tape measure
    framing square
    marking pencil
    large sponge

    For safety:

    dust mask
    safety glasses
    rubber gloves

    Laying Bathroom Tile

    1. Measure the length and width of the floor (figures A and B). You need these measurements in order to determine how much tile, cement, and grout that you need.

    • Note: A paper drawing of the area to be tiled will help to determine the proper number of tiles and other materials needed. You will need graph paper and a pencil for that.
      Photo

      Figure A

      Photo

      Figure B


    2. Choose your tile (figure C).