| Grout a Tile Floor |
| The final phase for installing a new porcelain-tile floor is to grout its joints. For more information on great kitchen products, go to Rip + Renew. |
From "Kitchen Renovations"
episode DKTN-602 |
|
|
|
advertisement
|
 |
|
This beautiful porcelain tile is seven times stronger than stone and will provide an easy-care floor for many years.
|
Materials: grout mix
grout floats (one large, one small)
bucket
sponge or rags 1. Thoroughly clean the floor with a vacuum, including the spaces between the tiles. If necessary, wipe the tiles down with a damp cloth. 2. Mix the grout according to the manufacturer's instructions. It should have the consistency of peanut butter. 3. Use a float to apply grout over the joints. (The small float makes it easier to reach into small spaces, such as the toe kick under the cabinets.) Pull the float across the tile at a 45-degree angle across the tile, avoiding a pattern that is either parallel or at right angles with the joints. 4. Wash off excess grout with a sponge and dry the tile with a cloth. You may have to repeat this step a few times to remove all of the hazy residue. Resources: tile
Website: www.crossvilleinc.com
| 
)
