DIY Network

WEB-EXTRA: Cut List for Egyptian Dresser From "Wood Works" episode WWK-708

Egyptian-Inspired Mahogany Dresser

Final Dimensions: 34-1/2" H X 43-1/4" L X 23" W

MATERIAL (QUANTIY) LENGTH x WIDTH x THICKNESS; USE

Mahogany (2) 43-3/4" x 4-3/8" x 1-1/2" ; Base side
Mahogany (2) 20-3/4" x 4-3/8" x 1-1/2" ; Base ends
Mahogany (2) 15-1/4" x 3" x 7/8" ; Bottoms of side frames
Mahogany (2) 15-1/4" x 1-1/4" x 7/8" ; Tops of side frames
Mahogany (4) 26-1/4" x 2-1/4" x 7/8" ; Stiles for side frames
Mahogany (4) 1-1/2" x 2-1/2" x 5/16" ; Loose tenons for frame bottom
Mahogany (4) 1-1/2" x 3/4" x 5/16" ; Loose tenons for frame top
Mahogany (2) 23" x 16-1/4" x 1/2" ; Plywood side panels
Mahogany (2) 33" x 3" x 7/8" ; Bottoms of front and back frames
Mahogany (2) 33" x 1-1/4" x 7/8" ; Tops of front and back frames
Mahogany (4) 26" x 4" x 7/8" ; Stiles of front and back frames
Mahogany (4) 1-1/2" x 2-1/2" x 5/16" ; Loose tenons for bottoms of front and back frames
Mahogany (4) 1-1/4" x 3/4" x 5/16 ; Loose tenons for tops of front and back frames
Mahogany Plywood (1) 33" x 21-3/4" x 1/2" ; Plywood back panel
Mahogany (2) 22" x 4-1/4" x 1-3/8" ; Crown sides
Maple Plywood (2) 19-1/4" x 4" x 1/2" ; Crown sides
Mahogany (1) 40-1/2" x 4-1/4" x 1-3/8 ; Crown front
Maple Plywood (1) 36" x 4" x 1/2" ; Crown front
Mahogany (1) 38-5/8" x 3-1/2" x 7/16" ; Crown back
Maple Plywood (2) 20" x 3-1/2" x 3/4" ; Rib supports
Maple Plywood (2) 3" x 3" x 3/4" ; Crown corner supports
Maple Plywood (2) 34-1/2" x 18" x 3/4" ; Top and bottom panels of dresser carcass
Maple Plywood (2) 21-5/8" x 18" x 3/4" ; Sides panels of dresser carcass
Maple Plywood (1) 34-1/2" x 18" x 1/2" ; Crown support (on top of carcass)
Mahogany (1) 42-1/2" x 2" x 3/4" ; Front of top frame
Mahogany (1) 38-1/2" x 1-5/8" x 3/4" ; Back of top frame
Mahogany (2) 23" x 2" x 3/4" ; Sides of top frame
Mahogany Plywood (1) 38-1/2" x 19-1/2" x 3/4" ; Top
Oak (2) 21-5/8" x 1" x 3/4" ; Drawer stops for sides of dresser
Oak (2) 31" x 1" x 3/4" ; Drawer stops for top and bottom of dresser
Oak (2) 17-5/8" x 1-1/4" x ; Bottom drawer runners
Oak (4) 17-5/8" x 1-3/4" x 1" ; Middle drawer runners
Oak (2) 17-5/8" x 1" x 1" ; Top drawer runners
Maple (2) 17-3/4" x 8" x 7/16" ; Sides of bottom drawer
Maple (2) 32-3/16" x 8" x 7/16" ; Front and back of bottom drawer
Mahogany (1) 33" x 8-3/4" x 3/4" ; Bottom drawer front
Maple (2) 17-3/4" x 7-1/4" x 7/16 ; Sides of middle drawer
Maple (2) 32-3/16" x 7-1/4" x 7/16" ; Front and back of middle drawer
Mahogany (1) 33" x 8" x 3/4" ; Middle drawer front
Maple (2) 17-3/4" x 4" x 7/16" ; Sides of top drawer
Maple (2) 32-3/16" x 4" x 7/16" ; Front and back of top drawer
Mahogany (1) 33" x 4-3/4" x 3/4" ; Front of top drawer
Maple Plywood (3) 31-1/2" x 17" x 3/8" ; Drawer bottoms
Ebony (6) 5-3/8" x 5/8" diameter x (N/A) ; Drawer pulls
Brass Mounting Rods (12) 1-3/8" x 3/16" diameter x (N/A) ; Drawer pulls

Finish: Potassium Dichromate, Tung Oil Mixture

advertisement

RESOURCES :

David Marks Website
David Marks, DIY's Wood Works host, is a master woodworker. For more information on cut sizes and project details, please contact him via his Website at www.djmarks.com